
TeSys Deca contactors
IEC power contactors for motor control up to 150 A (75 kW at 400 V), the main switching device in most motor starter panels.
Switchgear, automation, wires and wiring devices. Filter by category or brand, or search by name or series.

IEC power contactors for motor control up to 150 A (75 kW at 400 V), the main switching device in most motor starter panels.

Acti9 MCBs for Indian distribution boards, with overload and short-circuit protection and 10 kA breaking capacity to IS/IEC 60898-1.

Variable speed drive for asynchronous and synchronous motors in machines, in compact and book formats.

Compact PLC for simple machines, with Ethernet, serial, SD card and USB built in.

22 mm plastic push buttons, selector switches and pilot lights for panel doors.

Non-contact detection of metal targets. The M18 XS6 shown senses up to 8 mm and is rated IP68 / IP69K.

Modular MCBs for distribution boards. The 1P 6 A C-curve reference shown has 6 kA Icn and 10 kA Icu.

MCCBs for incomers and feeders. The DPX³ 160 HP shown is 4P, 160 A, 36 kA at 400 V.

Modular switches, sockets and IMD decorative plates for homes, hotels and offices.

Modular MCBs for commercial and residential boards. The 1P C16 reference shown is 10 kA Icn / 15 kA Icu.

Flame-retardant copper house wire in 0.75 to 6 sq. mm, 90 m coils, six colours.

Heat-resistant, flame-retardant, low-smoke, lead-free house wire, 1100 V AC to IS 694.

FR+HR PVC house wire with fine multi-strand copper, up to 1100 V AC, in 90 m and 180 m coils.

Heat-resistant, flame-retardant single-core house wire, 85 °C, up to 1.1 kV, to IS 694.

FR-LSH PVC flexible house wire up to 1.1 kV to IS 694:2010, with a maximum smoke density of 60%.

Siemens SIRIUS power contactors for motors, with 3RT25 covering 55 kW to 250 kW.

Basic Siemens drive: 0.12–3 kW single-phase 230 V and 0.37–30 kW three-phase 400 V, with USS and Modbus RTU.
ABB general-purpose drive from 0.75 kW up to 500 kW, 200–480 V, with Safe Torque Off (SIL 3) built in.

ABB S200 miniature circuit breakers to IEC/EN 60898-1 and IEC/EN 60947-2, IP20, halogen-free.

Omron's general-purpose plug-in relay, described by Omron as the relay that sets the standard.

Compact, user-friendly temperature controller with a high-quality LCD display.

True-RMS industrial multimeter, 1000 V CAT III / 600 V CAT IV, with a low-pass filter for accurate VFD measurements.

Electrician's multimeter with integrated non-contact voltage detection.

Industry-standard True-RMS troubleshooting multimeter for electrical systems.

True-RMS 600 V multimeter with a 6,000-count display, CAT III 600 V, 3-year warranty.

Compact CAT III clamp meter measuring AC current up to 400 A.

CAT III 1500 V clamp meter for solar arrays and wind power systems.

True-RMS AC/DC clamp meter with a detachable display for readings in hard-to-reach spots.

Anchor UNO miniature circuit breakers, 6 A to 63 A, 10 kA, B and C curves, SP to FP.

Anchor's enhanced switchgear range for protection against electrical faults.

Anchor standard modular switch range combining style with functionality.

Anchor prime modular switch range with sophisticated design options.

Metal push buttons and pilot lights, IP65 to IEC 60947 and NEMA 4 to UL 508.

Heavy-duty 30.5 mm push buttons and pilot lights, IP65 to IEC 60947.

Plastic push buttons and pilot lights, IP65 and NEMA 4.

Clip-on plastic push buttons and pilot lights, IP65 and NEMA 4.

Monoblock push buttons with built-in contacts, IP65.

Economy pilot light rated 12–240 V AC and 12–220 V DC.

Compact CE-certified monoblock pilot light for space-constrained panels.

Power contactors from 6 A to 1200 A AC-3, 3- and 4-pole, up to 1000 V, no derating to 60 °C.

MPCBs from 0.1 A to 63 A to IEC 60947-2 / 60947-4, with adjustable overload and clear trip indication.

Grey feed-through DIN-rail terminal block for conductors up to 2.5 mm², 1000 V (IEC).






Four-connection screw terminal block, 4 sq. mm, 800 V, 20 A.


4 digit programmable True-RMS panel ammeter and voltmeter.

Programmable 4 digit process indicator with triple range.

Programmable 4½ digit process indicator with RS-485 communication.

Digital power factor meter with built-in transducer.

4½ digit, 19,999-count True-RMS autoranging digital multimeter.

3-5/6 digit, 6000-count True-RMS autoranging pocket multimeter.

4 digit, 9999-count True-RMS autoranging pocket multimeter.

96 × 96 universal-input PID controller with 2 relays, 4–20 mA analog output and RS-485 Modbus.

48 × 48 digital timer with 3+3 digit dual display, on/off-delay and cyclic modes, and power-fail memory.

96 × 96 counter with separate process and set count displays, proximity or micro-switch input, auto/manual reset.

96 × 96 multifunction meter for 1Ø and 3Ø networks: V, A, Hz, PF, kW, kVA, kVAr and energy, class 0.5, RS-485 Modbus.

8-stage APFC relay for capacitor banks with auto, manual and rotation modes and an alarm output.

DIN-rail relay that trips on over/under voltage, phase asymmetry, phase loss, phase sequence and neutral loss.

DIN-rail earth leakage relay, 30 mA to 30 A with external CBCT, programmable trip delay, test and reset.

120 W DIN-rail SMPS, 100–270 V AC in, 24 V DC out, >89% efficient, with overload, short-circuit and over-temperature protection.

Metal cable glands, UL approved, metric and PG threads, IP68.

Nylon single-compression cable glands, metric and PG threads, IP68.

IP67 weatherproof enclosures: Basic series in ABS (IK08) and Heavy series in polycarbonate (IK10).

IEC 60309 industrial plugs and sockets in 16, 32, 63 and 125 A, IP67 panel sockets.

Thermal overload relay, 2.5–4 A, class 10A, to protect AC circuits and motors against overloads.

Metal limit switch to EN 50041, thermoplastic roller lever, 1NC+1NO snap action, IP66.

Miniature metal limit switch with steel roller plunger, 1NC+1NO, M12 connector, IP66/67/68.

M18 multimode photoelectric sensor, 12–24 V DC, PNP NO/NC, up to 20 m depending on mode.

25 bar pressure transmitter with 4–20 mA output, G1/4A, M12 connector, ±0.5% accuracy.

2-pole 25 A 30 mA AC-type residual current device with enhanced immunity to unwanted tripping.

4-pole 63 A C-curve RCBO with 30 mA AC-type earth leakage, 6 kA / 10 kA.

3P+N RCCB, 40 A, 30 mA type A, 6 kA, 4 modules.

Single-pole 16 A B-curve MCB, 6 kA to IEC 60898-1, 1 module.

Single-pole MCB range 6–63 A to IS/IEC 60898-1, with dual-connect terminals and trip-free mechanism.

Four-pole RCCB 25–63 A to IS 12640 / IEC 61008-1, finger-proof bi-connect terminals.

HR FR low-smoke-and-halogen house wire, lead free, 0.75–6 sq. mm, for multi-storey and public buildings.

4-core copper XLPE insulated LT power cables, armoured and unarmoured, 16 to 400 sq. mm.

Flame-retardant PVC house wire up to 1.1 kV to IS 694:2010, 90 m coil.

Halogen-free flame-retardant (EBXL HFFR) wire up to 1.1 kV to IS 17048, for fire alarms and public spaces.

1200 mm designer BLDC fan, 42 W, 215 CMM, copper winding motor.

1200 mm 5-star BLDC fan, 40 W, 265 CMM, 25 speed settings, reverse rotation.

5 W B22 LED bulb, 6500 K, 105 lm/W, 15,000 hours, 4 kV surge protection.

Motor starter protectors and circuit breakers in sizes S00, S0, S2 and S3.

Compact PLC for basic automation with motion control, fail-safe options and NFC access.

Scalable modular PLC with integrated motion control, PROFINET and OPC UA.

Logic module with up to 800 function blocks, 2.4" colour touch display, Ethernet, Modbus and MQTT.

SENTRON MCBs for residential, commercial and industrial boards, standard DIN dimensions.

Contactors up to 560 kW at 400 V AC-3, with electronic coils covering 24–500 V AC/DC in 4 coil versions.

45 mm manual motor starter, 32 A, 30 kA at 400 V, trip class 10, with disconnect function.

Compact machinery drive 0.25–22 kW, 200–480 V, with Safe Torque Off and Modbus RTU as standard.

Machinery drive 0.25–22 kW, 200–480 V, IP20 & UL Type 1, for induction, PM and SynRM motors.

General-purpose photoelectric sensor in a compact plastic housing.

Micro PLC designed for data collection and machine-to-machine communication.

Multifunction timer with multiple time ranges and operating modes, wide supply range, 8-pin socket.

OEM-focused touch-screen HMIs for machine operator panels.

Bimetal thermal and electronic overload relays that protect motors against overload and phase failure.

MCBs 0.5–63 A, B and C curves, 10 kA (up to 16 kA on select models), 1P to 4P.

Direct-on-line starter with NHD contactor and Citation overload relay, to IS/IEC 60947-4-1.

Next-generation relay interface module, 24 V DC input, 5 A contacts, screw clamp.

Solid-state relay interface module with fuse, 24 V DC input.

Grey feed-through terminal block for up to 2.5 mm², 250 V (IEC).

LED lamps from 2.9 W to 23 W, 6500 K, up to 15,000 hours.

High-wattage LED lamps, 30–50 W, 3000–5000 lm, 6500 K.

Rechargeable LED lamps 9–20 W with battery backup and automatic activation.

1250 mm ceiling fan, 60 W, 310 RPM, 240 CMM, rust-free reinforced blades.
No products match these filters. Clear the search or pick another category, or ask us directly.
The list shows the ranges we quote most often and is not the full catalogue of each manufacturer. If a part number isn't listed, send it anyway.
We'll reply within one working day.